Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Tomball, TX
Gate access control in Tomball means working on keypads, remotes, phone entry, card readers, and video intercoms attached to automated driveway gates across a city that blends new construction with working ranch property. The black clay soil around here shifts constantly, which throws travel limits out of calibration and stresses every connection point on an operator. If your keypad stopped opening the gate after heavy rain, or your remote only works from ten feet away now, call (346) 248-7685 and we’ll send a technician who documents every finding in writing before any work starts.
Why Tomball Homes Are Different
Tomball sits at the suburban-rural edge of northwest Harris County. Newer master-planned subdivisions along the SH 249 corridor typically have ornamental iron or aluminum driveway gates with modern automation, while ranchette properties along Telge Road and Huffsmith-Kohrville Road still run welded pipe gates with chain-link and older swing operators. A Tomball gate technician works on both generations of hardware in the same week.
The soil is the defining variable. Expansive black clay swells after Tomball’s 50-plus inches of annual rain and shrinks hard during dry spells, tilting gate posts seasonally. That movement pulls operators out of their travel-limit calibration, which is why a keypad that worked in April quits reading in July. The year-round humidity also accelerates rust pitting on ornamental iron hinges and latches, shortening service cycles compared to drier Texas markets. In the low-lying drainages near Spring Creek and Mound Creek, many operators flooded during Hurricane Harvey in 2017 and were replaced with budget units now reaching end-of-life together, so we see clusters of operator swaps in those 77375 neighborhoods.
Our Main Tomball Services
These are the three gate services Tomball homeowners call about most. Each has its own dedicated page with local pricing detail.
Gate Repair in Tomball
A sagging gate, a broken hinge, a post leaning out of plumb after a rain cycle, a latch that no longer catches. Gate Repair in Tomball covers physical failures on both ornamental iron and rural pipe gates, with a written price before work starts and a photo record when we leave.
Gate Installation in Tomball
New construction gates along the SH 249 corridor and replacement gates on acreage properties both start with a free measure and a written scope. Gate Installation in Tomball explains materials, operator pairing, and what the clay soil means for post depth.
Gate Motor & Opener in Tomball
Travel-limit drift from soil movement is the most common operator complaint in Tomball. Gate Motor & Opener in Tomball details operator replacement across nine automation brands and documents every limit-switch reading.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Tomball
Keypads, remotes, phone entry, card readers, and video intercoms are the access layer on automated Tomball gates, and they fail here for local reasons: soil-shifted posts torque the wiring, humidity corrodes terminal connections, and 1990s-era systems in the older subdivisions were never wired for today’s smartphone-based access. Gate Access Control is our full-service hub for this work, and in Tomball we see a steady pattern of keypads going dark after heavy rain events and card readers losing continuity where soil movement has stretched buried conduit.
Keypad Entry
Signs you need it
The keypad is unresponsive after rain, works intermittently, or only one code functions while the rest fail.
What it costs in Tomball
Keypad replacement on a Tomball driveway gate runs $180 to $420 depending on the brand and whether we’re reusing the existing conduit or pulling new control wire.
How we do it
We test voltage at the operator terminals, check the keypad’s output at the board, replace the unit and weather seals, reprogram codes, and photograph the finished wiring.
Remote Control
Signs you need it
Range has dropped to under fifteen feet, remotes work only when the gate is in sight, or only one of several remotes responds.
What it costs in Tomball
Replacement remotes run $60 to $140 each, and receiver replacement or frequency reprogramming runs $160 to $350.
How we do it
We test signal strength at the receiver, identify whether the antenna, the receiver board, or the remote units are degraded, then replace or reprogram and document the frequencies set.
What Gate Access Control Costs in Tomball
| Item | Typical range in Tomball |
|---|---|
| Keypad replacement | $180 - $420 |
| Remote replacement / programming | $60 - $140 per remote |
| Card reader installation | $450 - $1,100 |
Can you fix a keypad the same day in Tomball?
Yes. We stock keypads and control boards on local trucks, so most keypad failures in Tomball are resolved the same day. Call (346) 248-7685 for an exact quote, free.
Do you install video intercoms on Tomball gates?
We do. Video intercom installation runs $900 to $2,800 depending on camera placement, wiring distance, and whether it integrates with your existing automation. The written price comes before work starts.
Gate Parts & Welding in Tomball
Gate parts and welding in Tomball cover the physical failures that clay soil and humidity create: sheared hinge welds on heavy ornamental iron gates, rotted post bases where water pools, and bent rails on pipe gates that a pickup clipped at the wrong angle. Gate Parts & Welding is our dedicated hub, and in Tomball the rancher with a bent ranch gate and the subdivision homeowner with a rusted hinge both need the same thing: a repair that’s documented and priced before the welder fires.
Hinge Replacement
Signs you need it
The gate sags enough to drag on the ground, the hinge pin is visibly worn or cracked, or the gate shifts an inch or more when you lift it.
What it costs in Tomball
Hinge replacement on a Tomball driveway gate runs $110 to $350 per hinge, depending on the gate’s weight and whether we’re welding or bolting.
How we do it
We support the gate, cut or unbolt the old hinge, set and align the new one, weld or bolt it in place, and photograph the finished alignment.
Custom Welding
Signs you need it
A cracked weld at a gate corner, a broken picket, a bent rail that no replacement part matches, or a post that needs a custom bracket fabricated.
What it costs in Tomball
Custom welding on Tomball gates runs $90 to $180 per hour for mobile work, with most small fabrications finished in one to two hours.
How we do it
We match the gate’s material and profile, grind and prep the joint, weld with appropriate rod or wire, and photograph the repaired section before we leave.
What Gate Parts & Welding Costs in Tomball
| Item | Typical range in Tomball |
|---|---|
| Hinge replacement | $110 - $350 per hinge |
| Post replacement | $500 - $1,800 |
| Custom welding | $90 - $180 per hour |
Can you weld a broken gate post in Tomball?
It depends on the break location and the post’s condition. Minor cracks are weldable; rotted or severely shifted posts usually need full post replacement at $500 to $1,800. We’ll give you the written recommendation on site.
Do you handle rusted ornamental iron in Tomball’s humidity?
Yes. We grind out rust pitting, weld in patch material where needed, and recommend sealing products suited to Harris County humidity. The repair record includes photos of what we found and what we left.
Brands We Service in Tomball
We work on whatever motor is already on the gate. In Tomball, that’s most often BFT, Linear, Viking, and Ghost Controls units from the 1990s onward. Our trucks carry common parts for those brands, and most operator swaps are completed the same visit. See our brands for the full list.
Pricing for Gate Repair in Tomball, TX
| Service | Typical range in Tomball |
|---|---|
| Keypad replacement | $180 - $420 |
| Remote replacement | $60 - $140 each |
| Card reader installation | $450 - $1,100 |
| Video intercom installation | $900 - $2,800 |
| Hinge replacement | $110 - $350 per hinge |
| Post replacement | $500 - $1,800 |
| Custom welding | $90 - $180 per hour |
| Rail repair | $175 - $450 |
In Tomball, prices push upward when soil movement has shifted posts enough to require re-leveling before we can set an operator, and when water intrusion has corroded wiring that must be re-pulled. Whatever the number, it’s written and handed to you before any work starts, under Clause 1 of our Haven Standard.
Neighborhoods We Serve in Tomball
We cover the full Tomball area, from the SH 249 corridor subdivisions to the acreage roads north and west of town. Standard response across the area is same-day for urgent repairs, next-day for planned work.
- Spring Creek drainage neighborhoods (77375)
- Subdivisions along SH 249
- Telge Road ranchette parcels
- Huffsmith-Kohrville Road acreage
- Mound Creek adjacent properties
Service Area - Cities Near Tomball
For gate work in nearby communities, we also serve Pinehurst, TX, Spring, TX, Katy, TX, and Conroe, TX. Dispatch for the Tomball area is coordinated from our Houston office, and local crews are on the road daily across these cities.
Serving Tomball, TX - Our Local Coverage Area
We’re based in the Tomball area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Tomball
Same-day response for urgent failures like a gate stuck open or an operator that will not respond. We dispatch a named technician and send their photo before arrival. Call (346) 248-7685 and a live person answers any hour.
Some Tomball subdivisions require HOA approval for a full gate replacement or a color change. Repairs to existing hardware rarely do. We’ll note your HOA’s rules in the written scope if we see a compliance question.
Yes. When an operator or access control system needs new low-voltage runs, a photo-eye alignment, or a replacement safety edge, that’s part of the written scope and price. You get a photographed record of every connection when the job is done.
For a free estimate on gate access control, gate parts, or welding in Tomball, call (346) 248-7685. The price is written before work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Tomball Customers Say
"Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."Quoted in writing, installed on the day promised, and the price did not move. The crew was licensed and the number was on the paperwork."
- Wes A."The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H.