Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGhost Controls Gate Repair in Tomball, TX | Vance Gate Repair Tomball
We provide Gate Repair in Tomball for Ghost Controls gate openers as an independent provider, not a manufacturer-authorized shop. What separates our Ghost Controls work here is that we see the same failure patterns repeat across entire Tomball streets, because this town’s wet-dry clay cycles and the Harvey-flooded operator wave along the creek drainages punish these openers in predictable, fixable ways. Call (346) 248-7685 and a live person answers, any hour.
Why Tomball Residents Choose Us for Ghost Controls Service
We know Ghost Controls units well enough to tell you within the first ten minutes whether a TSS1 arm assembly is worth saving or whether the board corrosion has already won. Adrian Vance, our owner, came up through commercial access-control work starting in 2014, and that background shows in how we document every Tomball job. You get a written price before a tool comes out, and a photo log of what was found, what was adjusted, and what part number went in before we leave.
Tomball is a two-sided market for gate work. The SH 249 corridor subdivisions run ornamental iron and aluminum with Ghost Controls TSS1 and TDS2 openers as standard equipment. Then you hit Telge Road and Huffsmith-Kohrville Road, where the acreage properties still run pipe-and-board ranch gates, often with the same Ghost Controls opener bolted on and doing heavy work. We stock common Ghost Controls arm assemblies, limit switches, control boards, and remotes locally, and our Ghost Controls sales & service experience covers both worlds.
Common Ghost Controls Gate Repair Problems We Solve in Tomball
- Travel-limit drift from post movement. Tomball’s black clay heaves and shrinks with every wet-dry cycle, and a gate post that tilts a degree or two pulls the actuator arm off its limit magnet. The opener then stops mid-travel or over-travels and faults out. We reset posts or re-shim the arm bracket, then recalibrate limits and photograph the new readings.
- Control board corrosion from humidity and standing water. Harris County humidity never lets up, and the low-lying drainages near Spring Creek and Mound Creek add occasional standing water to the equation. Ghost Controls boards sit in a plastic enclosure that is not fully sealed, and corrosion starts at the terminal block. We clean terminals, re-tin connections, and replace boards when corrosion has reached the trace level.
- Actuator arm housing stress cracks. When a settling concrete pier puts a Ghost Controls arm in a slight bind, the plastic housing flexes every cycle. After enough years it cracks. We see this most often on TSS1 units mounted to piers that have shifted on 1990s subdivision lots. We weld or replace the bracket, address the alignment, and swap the arm when the housing is compromised past safe operation.
- Remote range loss from antenna wire corrosion or pinching. The antenna wire inside the operator neck gets pinched when the arm is reinstalled after a repair, or corroded when moisture gets in. If your remote worked at two hundred feet and now needs you standing at the gate, we test the receiver, check the antenna wire, and replace the remote if the board is fine.
- Battery backup failures on flood-adjacent lots. We have swapped Ghost Controls battery packs on three gates on the same street in a single month out here. When Harvey water got into the 77375 zip code drainages, a lot of budget replacements went in, and those sealed lead-acid batteries all age out on roughly the same clock.
BeforeAfterGhost Controls Service in Tomball: What Local Conditions Mean for Your Equipment
Tomball receives more than fifty inches of rain in an average year, and the expansive black clay under most of the city does not absorb it, it swells. Then it dries, and it shrinks. That cycle moves gate posts seasonally, and it moves them more dramatically in neighborhoods like Lakewood Grove along the SH 249 corridor, where the clay was cut and filled during subdivision grading and the fill never compacted as hard as untouched ground. What that means for a Ghost Controls opener is simple: your travel limits and force settings are not stable over a Tomball year. A TSS1 or TDS2 calibrated in March can be out of spec by June. Add in the Harvey replacement wave: low-lying lots near Spring Creek and Mound Creek, many in the 77375 zip code, had operators and boards submerged in 2017, and a wave of budget replacements went in because insurance checks had limits. Those units are now reaching end-of-life together, so one Tomball street can produce three same-model battery failures in a month. A Tomball tech learns to anticipate it. We keep those battery packs and replacement boards on the truck.
Ghost Controls Models & Products We Service in Tomball
We service the full Ghost Controls residential line, including the TSS1 Automatic Gate Opener Kit, the TDS2 Dual Swing Gate Opener Kit, the AXDP battery backup add-on, and the heavy-duty solar swing gate opener. On control boards and arm assemblies, we prefer genuine Ghost Controls parts. On older TSS1 and TDS2 units where OEM lead times stretch, we source quality aftermarket limit switches and remotes, and we tell you which we are quoting before the work starts. We also weld and repair rust-damaged hinges, brackets, and gate frames in-house, because in Tomball’s humidity the hardware around your Ghost Controls opener usually needs attention before the opener itself does.
Ghost Controls Service Pricing in Tomball
You get a written price before any work starts. Always. A Ghost Controls service call in Tomball typically runs $85 to $125 to diagnose, and that amount is credited to the repair if we do it the same day. Travel-limit recalibration and post-shimming work runs $140 to $260 depending on how far the post has moved and whether the arm bracket needs to be re-set. A new control board on a TSS1 or TDS2 runs $220 to $410 with labor, depending on board version and whether we are installing OEM or an aftermarket equivalent. Arm assemblies run $280 to $520 installed. Battery backup replacement runs $110 to $190 for the battery itself plus install time. Every estimate includes the written scope, the written number, and the photo log when the work is done. Call (346) 248-7685 for a free estimate, and bring any other company’s written quote and we will review it at no cost.
Serving Tomball, TX - Our Local Coverage Area
We’re based in the Tomball area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Ghost Controls Gate Repair in Tomball
The clay under the gate post swelled, the post tilted slightly, and the travel limit on your Ghost Controls arm is now out of position. We see it constantly after heavy rain. The fix is to re-set or shim the post and recalibrate travel limits and force on the opener, which runs $140 to $260 depending on how far things moved. Call (346) 248-7685 and we’ll come look.
We can, and we still service plenty of them in the low-lying Tomball neighborhoods near Spring Creek and Mound Creek. If the board is salvageable after corrosion cleaning, we say so and quote the repair. If the board and arm housing both took standing water, we tell you the truth: our Gate Installation in Tomball is often the smarter money. No pressure either way, just a written price for both options.
Both, and we name which one we are quoting. We prefer genuine Ghost Controls boards and arm assemblies, and we stock common units locally for fast Tomball turnaround. On older TSS1 and TDS2 units where OEM lead times run weeks, we offer quality aftermarket limit switches and remotes, and the written estimate shows the part brand and number before anything is installed.
It’s usually not the signal. The two most common causes we find on Tomball Ghost Controls units are a pinched or corroded antenna wire inside the operator neck, or the receiver board has taken humidity damage. We test the receiver, check the wire, and replace only what is actually failing. A diagnostic call is $85 to $125, credited to the repair.
The TDS2 drives two swing gates from two posts, which means twice the surface area for clay movement. If one post settles faster than the other, the gates go out of plane and the openers bind. This is a constant Tomball issue on iron gates built in the 1990s and early 2000s when piers were occasionally poured shallow. We re-level the posts, weld any stress cracks, re-sync the TDS2 arms, and recalibrate limits.
Service Areas Near Tomball
Our Ghost Controls techs serve Tomball, the wider Tomball service area, Pinehurst, Spring, Jersey Village, and Conroe. We also run Ghost Controls repair calls regularly in Ghost Controls service in Pinehurst and Ghost Controls service in The Woodlands, where the subdivision gate stock is similar to what we see off SH 249.
Book Your Ghost Controls Service in Tomball Today
If your Ghost Controls opener is stopping short, grinding, or just clicking when you hit the remote, call (346) 248-7685. A live person answers, we schedule the visit around your day, and you get a written price before we do any work. Name what you found. Name what it costs. Name what you left behind. That’s how we run every Tomball job.
Written by Adrian Vance, Owner at Vance Gate Repair Tomball, serving Tomball since 2014.