Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Pinehurst, TX
Gate access control in Pinehurst usually means retrofitting keypads, intercoms, or phone entry onto gates that were built before automation was ever common. The soil here moves, the gates are often hand-welded pipe-and-bar from older ranch properties, and a single service call frequently turns into a three-gate job because so many Pinehurst properties have separate driveway, pasture, and arena entries. Call (346) 248-7685 and we’ll give you a written price before any work starts.
Why Pinehurst Homes Are Different
Pinehurst sits in Montgomery County’s semi-rural transitional belt where multi-acre parcels are the norm, not the exception. Most of the gates we service here are either aging welded-pipe ranch gates on legacy acreage lots or newer ornamental iron swing and slide gates on custom-home driveways. The housing stock runs from older ranch homes on 2 to 10 acre lots, some predating incorporation, to newer custom builds. The older properties in particular tend to have hand-welded or repurposed pipe-and-bar gates with deteriorating hardware that was never designed for automatic operators added later. Add in the high-shrink-swell Beaumont and Lufkin clay soils that expand and contract with Pinehurst’s wet-dry cycles and 50-plus inches of annual rainfall, and you get leaning posts, heaving hinges, and alignment failures as a constant companion to nearly every automatic gate repair here. That soil movement is exactly why post stabilization becomes part of so many access control and welding jobs in Pinehurst.
Our Main Pinehurst Services
Most Pinehurst calls start with one of three jobs: a gate that won’t open or close properly, a full gate replacement, or a motor and opener that needs service or upgrade.
Gate Repair in Pinehurst
Gate repair in Pinehurst often means fixing sagging hinges, cracked welds, bent rails, and shifted posts on gates that have been working the clay soil for decades. We repair the gate itself, not just the motor, and we document every adjustment with photos before we leave. Gate Repair in Pinehurst covers swing, slide, and manual gates.
Gate Installation in Pinehurst
New gate installation in Pinehurst starts with the soil. Beaumont clay behaves differently than the sandier soils further south, so post depth and footing design matter more here than almost anywhere else in Montgomery County. Gate Installation in Pinehurst covers single and double swing gates, slide gates, and ranch-style pipe gates.
Gate Motor & Opener in Pinehurst
Opener work in Pinehurst frequently involves motors that were retrofitted onto gates originally built for manual operation. The motor may be fine while the bracket, arm, or post has moved out of spec. Gate Motor & Opener in Pinehurst covers repair, replacement, and full automation retrofits.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Pinehurst
Gate access control in Pinehurst means giving the right people a way in, and keeping everyone else out, on properties where the house is often a hundred yards or more from the road. Keypads, remotes, phone entry, card readers, and video intercoms all have to hold up to Montgomery County humidity, direct sun, and the occasional curious horse. Our work is documented under The Haven Standard, and the full scope is covered on our Gate Access Control page.
Keypad Entry
Signs you need it
Codes stop working intermittently, or the keypad face is cracked and letting moisture into the board.
What it costs in Pinehurst
Replacement keypad units and wiring typically run $150 to $350 installed, depending on whether the existing wire can be reused.
How we do it
We test the wire run, swap the keypad, program the codes, and photograph the settings before we leave.
Phone Entry
Signs you need it
Visitors can’t reach you from the gate, or the call goes through but the button to open won’t trigger the operator.
What it costs in Pinehurst
Phone entry systems generally cost $400 to $800 installed in Pinehurst, depending on whether we’re adding a cellular unit or using an existing internet line.
How we do it
We mount the unit, wire it to the gate operator, test the relay, and leave a written record of the programming so another technician doesn’t have to guess later.
Video Intercom
Signs you need it
You want to see who’s at the gate before opening it, or you’re tired of walking out to identify delivery drivers.
What it costs in Pinehurst
Video intercom packages typically run $500 to $900 installed, with Wi-Fi options on the lower end and hardwired PoE units higher.
How we do it
We run the wire or set the unit up on your network, mount the camera station, and configure the app with you standing there.
What Gate Access Control Costs in Pinehurst
| Item | Typical range in Pinehurst |
|---|---|
| Keypad replacement | $150 - $350 |
| Phone entry system | $400 - $800 |
| Video intercom installed | $500 - $900 |
Does the clay soil affect access control hardware in Pinehurst?
A post that shifts by even two inches can pull a keypad wire loose or misalign a phone entry sensor. We check post stability on every access control call and flag it before it takes out your new equipment. Call (346) 248-7685 and we’ll quote it flat.
Can you add a keypad to an old ranch gate in Pinehurst?
Yes, and many older Pinehurst properties already have a gate that can carry one. The questions are whether the post is plumb and whether the wire run has survived. We’ll give you a written price after we check, and the estimate is free.
Gate Parts & Welding in Pinehurst
Gate parts and welding in Pinehurst straddle repair and fabrication. Many of the gates out here were welded decades ago from whatever pipe was on hand, and now the hinges are wallowed out, the posts are leaning, and the rail has cracked at the stress point. We do the welding on site or in-shop, and the full parts breakdown is on our Gate Parts & Welding page.
Hinge Replacement
Signs you need it
The gate drags on the latch side, or you can see daylight through a stretched hinge barrel.
What it costs in Pinehurst
Hinge replacement runs $90 to $220 per hinge depending on weight rating and whether grinding out the old weld is needed.
How we do it
We cut or unbolt the old hinge, weld in the new one, and re-hang the gate with the gaps photographed top and bottom.
Post Replacement
Signs you need it
The post leans far enough that the gate won’t latch, or the base is spalling and rust-jacked out of the concrete.
What it costs in Pinehurst
Post replacement runs $180 to $400 per post here, depending on depth, diameter, and whether the old footing has to be broken out.
How we do it
We dig or drill the new footing below the clay’s active zone, set the post, and brace it until the concrete cures.
Rail Repair
Signs you need it
A crack runs through the main rail, or the gate has dropped enough to scrape the driveway.
What it costs in Pinehurst
Rail repair and straightening run $120 to $250 per section, more if we’re adding a gusset or splicing new tube stock.
How we do it
We weld the crack, grind it smooth, and shoot the gate’s alignment before and after so the fix is on record.
What Gate Parts & Welding Costs in Pinehurst
| Item | Typical range in Pinehurst |
|---|---|
| Hinge replacement | $90 - $220 per hinge |
| Post replacement | $180 - $400 per post |
| Rail repair / welding | $120 - $250 per section |
Can you weld a broken gate in place, or does it have to be removed?
Most cracks can be welded in place. We bring a mobile machine, clamp the gate square, and weld it where it hangs if the access is safe. We’ll tell you upfront if removal would be a better repair.
Why do posts lean so often in Pinehurst?
The Beaumont clay expands when wet and shrinks when dry, and over years that movement works posts out of plumb. A post set in a shallow footing will lean faster. We set replacements below the active soil zone when we can.
Brands We Service in Pinehurst
We service Viking, Ghost Controls, and DoorKing operators in Pinehurst, among others, and keep common parts for these brands in local stock. If you have a different motor on the property, we’ll work on that too. See our brands page for the full list of nine lines we carry and support.
Pricing for Gate Repair in Pinehurst, TX
| Service | Typical range in Pinehurst |
|---|---|
| Keypad replacement | $150 - $350 |
| Phone entry system | $400 - $800 |
| Video intercom installed | $500 - $900 |
| Hinge replacement | $90 - $220 per hinge |
| Post replacement | $180 - $400 per post |
| Rail repair / welding | $120 - $250 per section |
What pushes a Pinehurst price up is usually soil. A post that needs to be re-set on a 10-acre equestrian property takes more time than a hinge swap on a smooth suburban street, and the clay doesn’t always come out in one piece. Whatever the number is, you’ll get it in writing before we pick up a tool, under Clause 1 of The Haven Standard.
Neighborhoods We Serve in Pinehurst
We cover the whole Pinehurst area, from the eastern edge along FM 149 to the larger lots west toward the county line. Most calls inside Pinehurst can be reached within about 45 to 75 minutes from dispatch.
- Pinehurst city center and the FM 149 corridor
- Acreage lots west of town toward the county line
- Properties around the Pinehurst schools area
- Equestrian parcels along the northern boundary
- Custom-home lots on the newer subdivisions south of town
Service Area - Cities Near Pinehurst
We serve Pinehurst and the surrounding Montgomery County area, including Tomball, TX, Conroe, TX, Prairie View, TX, and Spring, TX. Scheduling is coordinated from the brand’s Dallas-Fort Worth office, with crews dispatched to Pinehurst locally.
Serving Pinehurst, TX - Our Local Coverage Area
We’re based in the Pinehurst area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Pinehurst
Some Pinehurst subdivisions do have architectural committees, and newer custom-home communities often require approval before a gate style or height changes. For repairs that keep the same footprint, approval is rarely needed. We’ll tell you what we see, but the HOA is your call to make.
Most Pinehurst calls are reached within 45 to 75 minutes from dispatch. A live person answers the phone at (346) 248-7685 around the clock, and we’ll give you a written price before the technician starts the job.
Yes, and it’s a pattern we know well out here. Many acreage properties have a driveway gate, a pasture gate, and an arena or pen gate. We’ll quote every gate on the same visit, with one written price covering everything before any work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Pinehurst Customers Say
"Quoted in writing, installed on the day promised, and the price did not move. The crew was licensed and the number was on the paperwork."
- Wes A."The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B.