Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Aldine
Gate repair in Aldine usually comes down to one of three jobs: a commercial slide gate at a freight yard that opens 200 times a day, a sagging swing gate on a 1970s driveway, or a flood-damaged operator near Greens Bayou that needs to be raised and rewired. Most repairs run $180-$900 depending on what failed. We dispatch to Aldine from our Houston office, and a live person answers at (346) 248-7685 any hour of the day or night. You get a written price before any tool comes off the truck, and a photo record of every adjustment before we leave.
Why Vance Gate Repair Tomball Is Aldine’s Preferred Gate Repair Company
Our Gate Repair crews spend a lot of time working the industrial corridor along I-45 and Beltway 8 North, where the gates are bigger, heavier, and run harder than anything in the residential neighborhoods just north of here. A trucking yard gate that fails means a dock loses an hour. We treat it that way. We carry heavy-duty slide gate hardware, commercial operators, and loop detectors on the truck when we head into Aldine, because we know what’s waiting there.
The Haven Standard governs every visit: a written scope, a written price, and photo documentation of what we found, what we set, and what we installed. That’s the same documentation habit Adrian Vance built doing access-control work starting in 2014, and it means you’re never paying a second technician to rediscover what the first one figured out. Under Clause 4 (Evidence on every job), you get the photo log before we pull out of the driveway.
Our background-checked, uniformed technicians arrive with a name and photo sent to you before they show up. The price you signed is the price you pay. And if the repair isn’t right, the 365-Day Done Right Promise means we come back and make it right at no charge for a full year.
Our Gate Repair Services in Aldine
Electric Gate Repair
Electric gate repair in Aldine means diagnosing whatever controls the motor: control boards, limit switches, photo-eyes, loop detectors, or the operator itself. On a freight yard slide gate off Airline Drive, our crew replaced a failed Viking slide operator with a rack and pinion system and added a new loop detector at the entrance so an 18-wheeler could enter without stopping. We reset the travel limits so the wide gate wouldn’t overrun its track. That’s the kind of job Aldine throws at you that a purely residential shop isn’t ready for.
Common Aldine electric failures include water-damaged circuit boards, burned motor windings from the humidity eating at insulation, and limit switches that drift after thousands of cycles. We carry boards and limit switches for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so we can usually repair what’s on the property instead of pushing a replacement.
Automatic Gate Repair
Automatic gate repair is about the motor and everything that tells the motor what to do. In Aldine’s wet-dry clay cycle, the gate’s physical alignment changes as the posts heave, which throws off the travel limits and makes the operator work against itself. We see this constantly on the 1970s tract-home swing gates and on acreage gates near Greens Bayou.
On a long driveway off Airline Drive with no mains power at the gate, we installed a solar gate opener with a battery bank and set the travel limits to match the actual swing of the gate, not the manufacturer’s default. The gate had been overrunning its track by a few inches on every cycle. We photographed the corrected limit-switch position and left that record with the homeowner.
Hinge & Post Repair
Aldine’s Beaumont clay soil expands and contracts with every wet-dry cycle, and it works gate posts loose over time. The hinge post on a 40-year-old swing gate is often set in concrete that was poured too shallow for Harris County conditions, and the whole post tilts a degree or two every decade. The gate starts dragging, the latch won’t line up, and the operator burns out fighting the bind.
We reset and re-pour hinge posts, cut and weld new hinge barrels, and shim gates back to level. On ornamental iron gates in Aldine, we also do weld and rust repair on the hinge areas, where the rust is usually worst because water collects there. The fix is documented with before and after photos, including the new post depth.
Gate Realignment
Gate realignment for a swing gate usually starts with the hinge post. For a slide gate, it starts with the track, the rollers, or the rack. Aldine’s clay-heavy ground means roller brackets and track beds sink unevenly, and the gate starts walking off the rack. We level the track, replace worn rollers, and reset the rack so the pinion gear meshes cleanly.
We see chronic sag on the long, narrow side-yard gates that are so common in Aldine’s 1960s through 1980s tract homes. The fix usually involves resetting the post, adjusting the hinges, and adding a brace if the gate frame itself is racked. Every adjustment gets a photo and a written note in the job record.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Aldine
We work on whatever operator is already bolted to the gate. That includes the workhorses we see most often on Aldine’s commercial corridors: BFT, Linear, and Viking. We also service Ghost Controls on residential and acreage installations, plus LiftMaster, FAAC, DoorKing, Elite, and Mighty Mule. We stock common boards, limit switches, remote receivers, and loop detectors for faster turnaround, and we don’t steer a repair toward a replacement just because a particular brand is unfamiliar.
Common Gate Repair Problems We See in Aldine Homes
- Heaved hinge posts and sagging swing gates. Beaumont clay expands in wet months and shrinks during dry spells, tilting posts out of plumb. Gates that dragged after the last big rain are often binding again by August. We reset the post, adjust the hinges, and re-photograph the gate’s closed position so you have a baseline.
- Flood-damaged operators near Greens Bayou. Properties in Aldine’s flood corridors frequently have gate operators installed at grade with no weatherproofing elevation. After a heavy rain, the control board is waterlogged and the motor is seized. We replace and remount the operator higher, add a riser, and seal the box.
- Rack and pinion wear on commercial slide gates. The trucking yards and warehouses along I-45 and Beltway 8 run gates constantly, and the rack wears. The gate starts jumping or stalling mid-travel. We replace worn rack sections and reset the pinion mesh so the gate travels smoothly under heavy use.
- Humidity-accelerated rust and board corrosion. Aldine’s subtropical humidity rusts iron gate frames fast and corrodes the internals of gate operators faster than drier Texas markets. We cut out rusted sections, weld in new material, and treat the repair, then check the operator’s board and wiring for corrosion damage while we’re there.
Pricing for Gate Repair in Aldine, TX
A swing gate realignment in Aldine typically runs $180-$340, depending on whether the hinge post needs to be reset or just the hinges adjusted. A hinge post re-pour runs $450-$800 when concrete and new hardware are required. Electric gate troubleshooting and board-level repair usually lands between $220-$520, and a residential slide or swing operator replacement runs $850-$1,600 installed. Commercial slide gate operators on Aldine’s freight yards start around $2,200 and go up from there based on motor size, battery backup, and loop detector work.
The price is written and handed to you before any work starts. That’s Haven Standard Clause 1. If another company already wrote you an estimate, bring the paperwork and we’ll review it at no cost. Estimates are free, and the number you sign is the number you pay.
We Also Serve Cities Near Aldine
While this page is written for Gate Repair in Aldine, our crews also serve the surrounding communities of Tomball, Pinehurst, The Woodlands, and Spring. If your property sits just outside Aldine’s boundaries, call (346) 248-7685 and we’ll confirm coverage and schedule a visit.
Serving Aldine, TX - Our Local Coverage Area
We’re based in the Aldine area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Aldine
We level the track and its supports, replace the worn rack sections, and reset the pinion so it meshes cleanly across the full travel. The clay here heaves the track bed every wet-dry cycle, which is why the gate rides up off the rack and jerks. Once the track is level, we reset the travel limits and photograph the new positions. Call (346) 248-7685 for a written quote, and we’ll have a technician out to diagnose it in person.
Yes, this is a big part of what we do in Aldine. Cantilever gates don’t have a ground track, so the failure points are different: roller assemblies, counterweight, and the operator that drags thousands of pounds per cycle. We service the heavy-duty slide operators common on trucking yards, including BFT and Viking, and we carry loop detectors to keep entry lanes moving. Call (346) 248-7685 and we’ll send a technician who’s worked those gates before.
We replace the waterlogged control board and seized motor, then remount the new operator on a riser or pedestal so it sits above the water line that got the old one. Many of the original installations in Aldine’s flood corridors were put in at grade with no elevation, which means they flood again every time the water rises. We also seal the new housing and route wiring so water doesn’t wick up into the box. Call (346) 248-7685 for a free estimate on a flood-hardened operator install.
Aldine’s humidity is severe most of the year, and moisture sits on the iron and works into the seams, especially at the hinge welds and the bottom rail where water pools. Gates that are 50 years old have usually lost their original coating. We cut out the rotted sections, weld in new material, grind smooth, and recoat the repair. We also check the operator for corrosion damage while we’re on site, because the same humidity that rusts the gate is eating the circuit board from the inside. Call (346) 248-7685 and we’ll give you a written price for the rust repair.
We dig out the post, re-pour the concrete to a proper depth, and set the post plumb before re-hanging the gate. The original post on a 1970s Aldine home is often set too shallow in the expandable clay, and decades of wet-dry cycles have worked it loose. We document the new post depth and re-hang with new hinges or rebuilt hinge barrels if needed. Call (346) 248-7685 for a written quote on the post reset and realignment.
Written by Adrian Vance, Owner at Vance Gate Repair Tomball, serving Aldine and the surrounding communities since 2014.