Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Aldine
Gate Repair - Aldine starts with installation costs between $1,900 and $14,000 depending on the gate type, operator, and what’s already in the ground. Most single swing gates with a new motor run $2,400 to $5,800. Cantilever slide gates built for truck traffic start around $6,500 and climb from there. If you’re on the north side near I-45 or Beltway 8, call (346) 248-7685 and we’ll put the real numbers in writing before anyone digs a hole.
We work Aldine every week. We know the clay, the flood corridors, and the difference between a gate that needs new hinges and one that needs a deeper post. Our Gate Installation crews carry the hardware for both residential and high-cycle commercial jobs, because Aldine is not a typical suburb. It’s a mix of 1960s tract homes, Greens Bayou floodplain, and trucking yards that cycle their gates hundreds of times a day.
You get a written price before work starts. You get a photo record of what we found and what we set. No surprises at the end.
Why Vance Gate Repair Tomball Is Aldine’s Preferred Gate Installation Company
Most gate companies in north Houston treat Aldine as an afterthought. They send a tech who knows residential swing gates and nothing about the cantilever slides running off I-45 feeder roads. That’s the wrong tool for this area. Aldine has more heavy-format slide gates per mile than almost any unincorporated pocket in Harris County, and they fail differently than the gates in The Woodlands or Spring.
We carry nine automation brands, so when a LiftMaster is the right call on a 1970s ranch gate, we install a LiftMaster. When a BFT hydraulic operator is what a commercial slide needs, we quote a BFT. Nobody steers you toward a replacement you don’t need.
Every Aldine job gets the same documentation habit Adrian Vance built in commercial access control starting in 2014. Wiring diagrams, limit-switch readings, hinge condition, post depth. Photographed and left with you. Under the Haven Standard, Clause 4, that photo record is on every visit, at no additional charge.
Pricing is written and handed to you before any work starts. That’s Clause 1. No verbal estimate, no handshake, no invoice that lands above the quote. The price on paper is the price you pay.
Our Gate Installation Services in Aldine
Driveway Gate Installation
Driveway gates in Aldine split into two worlds. On the residential side, we’re installing swing gates on properties that run long and narrow, often with a side yard gate and a front drive gate. On the commercial side, we’re setting cantilever slide gates that have to pass 18-wheelers all day without rack teeth stripping or motor burnout. Most residential driveway gate installations in Aldine run $2,400 to $6,200 complete with operator, safety photocells, and a written setup record.
Pedestrian Gate Installation
Side-yard pedestrian gates are common in Aldine’s 1960s and 1970s tract homes, where the original gate was hung on a poured concrete post that’s now cracked or leaning. We replace the post, not just the gate. A pedestrian gate install with a new post, latch, and closer in Aldine typically runs $650 to $1,700 depending on the gate width and whether we’re matching an existing iron fence line.
Sliding Gate Installation
Sliding gates in Aldine usually mean heavy steel on a track or a cantilever setup that rides above ground. The trucking yards along I-45 and Beltway 8 North are prime territory for this work. A new cantilever slide gate for a commercial lot starts around $6,500 and goes up to $14,000 plus operator, depending on the opening width and whether we’re building a new post foundation. High cycle means the motor matters, and we size it for the duty cycle, not just the gate weight.
Swing Gate Installation
Swing gates remain the most common residential installation in Aldine’s older neighborhoods, but the soil here punishes them. Beaumont clay expands when wet and contracts when dry, and that cycle leans posts out of plumb. We set swing gate posts deeper than the original builders did and use self-aligning hinges where the hinge post shows movement. A complete swing gate replacement with operator in Aldine runs $2,200 to $5,500 for most driveways.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Aldine
We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters in Aldine because so many properties still run original operators from the 1980s and 1990s, and the board or motor in that unit is often repairable if someone actually stocks the part. We keep common boards and limit-switch assemblies on the truck for the brands we see most in north Houston, which cuts the wait when an old gate quits mid-cycle.
We don’t steer an Aldine customer toward a new operator just because the old one is old. If the control board is burned and the motor windings test fine, we quote a board replacement. You’ll see the test readings. You’ll see the photo of the board before and after. Then you decide.
Common Gate Installation Problems We See in Aldine Homes
- Clay-driven post lean shearing hinge welds. The shrink-swell cycle in Harris County’s Beaumont clay pushes original 1960s and 1970s gate posts out of plumb, and the hinge welds take the stress until they crack. This is the most common call we get for swing gates in Aldine’s older subdivisions.
- Grade-level operators shorting out after Greens Bayou floods. Because Aldine sits in unincorporated Harris County, many original operator installations were never elevated above the flood line. After heavy rain, those control boards and motors take on water and fail. Installations should be elevated and weatherproofed.
- Rack-and-pinion slide gates stripping teeth at high cycle. The trucking gates off I-45 and Beltway 8 North can cycle hundreds of times per day. Undersized posts and original rack hardware wear out fast under that load. We quote for the duty cycle, not just the gate width.
- Operators installed before UL 325 entrapment protection became standard. Gates installed in the 1970s and 1980s often have no photo-eye sensors or reversing edge. Retrofitting these to current safety standards is not optional. We install the sensors and re-test the reverse function before we leave.
Pricing for Gate Installation in Aldine, TX
Here’s what Aldine’s market actually looks like, in writing:
- Pedestrian gate with new post and closer: $650-$1,700
- Single swing gate with operator and safety photocells: $2,200-$5,500
- Double swing gate with operator: $3,800-$8,400
- Cantilever slide gate, commercial, no operator: $6,500-$11,000
- Full commercial slide gate with high-cycle operator: $8,500-$14,000
- Post replacement with deeper concrete pier: $500-$1,400 per post
The big variables are gate length, post condition, operator type, and whether the existing concrete can be reused. Aldine’s clay soil sometimes means replacing a post that looked perfectly fine from the surface. We’ll show you what we found before we write the price. Call (346) 248-7685 for a free measure and a written estimate. The number on the page is the number you pay.
We Also Serve Cities Near Aldine
Our Aldine crews also cover Tomball, Pinehurst, The Woodlands, and Spring. If you’re in a neighboring city with a gate installation need, the same written price and photo documentation applies. Dispatch is coordinated from the Houston metro office, and crews serve each city locally. The Gate Installation in Aldine page covers this market; call for service elsewhere in north Harris County and we’ll route you to the nearest crew.
Serving Aldine, TX - Our Local Coverage Area
We’re based in the Aldine area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Aldine
The post is almost always the culprit in Aldine. The Beaumont clay shrink-swell cycle moves the post, not the gate. If you’re adjusting hinges every season, the post has moved out of plumb and the hinge welds are absorbing the stress until they crack. The fix is cutting the post at the footing, pouring a deeper pier, and re-hanging the gate with self-aligning hinges. Call (346) 248-7685 and we’ll measure the lean before you spend another summer fighting it.
Yes, in most cases. UL 325 requires photo-eye sensors and an auto-reverse function. We can add those to an existing operator if the motor and control board are still sound. If the board is too old to accept sensor inputs, replacement is the honest call. We’ll show you the test readings and the photos before you decide. Call (346) 248-7685 for a written quote on retrofitting versus replacing.
Because the motors were sized for residential duty cycles, not commercial cycle counts. A gate that opens 300 times a day wears a residential motor out in months. We size motors for the actual daily cycle count and install rack and pinion hardware rated for heavy use. If you’re near Aldine’s I-45 or Beltway 8 corridor, we can audit the current setup and quote what a proper high-cycle installation costs. Call (346) 248-7685.
No. If you replace it at grade level in the same spot, it will flood again next heavy rain. The fix is elevating the operator and sealing the enclosure before the next Greens Bayou overflow. Many original Aldine installs were done without weatherproofing elevation because unincorporated Harris County didn’t require it. We elevate and weatherproof as standard on any replacement. Call (346) 248-7685 for a written scope and price.
Deeper than the original builders went. Most 1960s and 1970s posts in Aldine were set at 24 to 30 inches. In Beaumont clay, we set gate posts at 36 to 48 inches with a wider footing and gravel base to handle the shrink-swell cycle. The exact depth depends on the gate weight and soil condition at your specific property. Call (346) 248-7685 and we’ll take a core reading before we write the plan.
Contact Vance Gate Repair Tomball for Gate Installation in Aldine
We replaced a sagging 14-foot ornamental iron swing gate on a 1970s ranch near Greens Bayou where the original concrete hinge post had tilted a full inch out of plumb after summer drought cracked the Beaumont clay. We cut the old post at the footing, poured a deeper pier, re-set the gate with new self-aligning hinges, and paired a LiftMaster operator with new safety photocells, because the original install predated UL 325 entrapment rules. That job took one day and the customer got a photo log of every step.
That’s how we work in Aldine. Call (346) 248-7685 for a free measure and a written price. A live person answers, day or night.
Written by Adrian Vance, Owner at Vance Gate Repair Tomball, serving Aldine since 2014.